Incinolet Canada
Kit d'installation Incinolet, 120 V ; KITC
Kit d'installation Incinolet, 120 V ; KITC
Incinolet Toilet Questions
Incinolet Toilet Questions
What power does the Incinolet need?
A dedicated 20 amp circuit. Choose 120 V at about 2000 W or 240 V at about 3500 W.
How many people can it support full time?
120 V model is about 4 people, 240 V model is about 6 people.
Does it use water or need a septic system?
No. It incinerates waste using electric heat and vents outside.
Do I need a bowl liner every time?
Yes, for every use. New units include one box of 200 liners. Bowl Liners can be purchased here.
How long is a cycle and can I use it during the cycle?
Heater runs about 60 to 75 minutes, the blower continues 20 to 40 minutes to cool. You can use it any time during a cycle, then press Start again.
How much electricity per cycle?
About 1.5 to 2.0 kWh per full cycle. Example at $0.20 per kWh is roughly $0.30 to $0.40 per cycle.
What can go in the toilet?
Human waste, toilet paper, and tampons. Do not burn trash or food. Use a liner each time.
How do I vent it?
Horizontal or vertical to outdoors, end with a dryer flap or rain cap. If total run is over 10 feet or uses more than two elbows, increase to 6 inch pipe, 15 feet max. Do not vent into an attic or crawl space.
Will there be odours?
Little to none with correct venting and by starting a cycle after each use. Overloading or poor venting can cause odor.
What happens during a power outage?
If a cycle stops mid-burn you may notice smoke or odour. Open a window. When power returns the fan restarts to cool the unit.
How often do I empty the ash and how do I dispose of it?
Empty when ash is light in color or no more than 2 inches deep. Dispose of cooled ash in household trash per local rules. Do not use it as fertilizer.
Can I run it from solar or a generator?
Technically yes, but we don't advise it. If your system supplies the continuous wattage on a dedicated 20 A circuit. Plan around 1.5 to 2.0 kWh per cycle.
Where can I install it and what clearances are needed?
Cabins, basements, bunkies, boats, RVs, and more. Allow room on the right side to operate the pedal and follow the manual’s clearance notes.
What is the warranty?
3 years on toilets having regular use and maintenance.
Do you offer pickup?
Pickup is available from our Beamsville showroom or our warehouse terminal, stock dependent.
Is Incinolet approved in my area?
Although CSA approved, requirements vary by province and municipality. Treat it as an electrical appliance install and check with your local Authority Having Jurisdiction and a licensed electrician. diction and a licensed electrician.
Shipping and delivery
Shipping and delivery
Every Incinolet toilet includes free shipping anywhere in Canada except Yukon, Northwest Territories, and Nunavut, for a flat shipping fee of $250.00.
Delivery Times
- 2–5 business days
- 2–7 business days
Parts & Accessories
Replacement parts and bowl liners ship via UPS and are subject to standard shipping fees.
Remote or Limited Addresses
If your shipping address is not accessible, please arrange delivery to the nearest post office, courier pickup point, or freight terminal.
Please note: we cannot ship to PO Boxes.
Purchase Orders
Purchase orders are accepted. Include your PO number in the order notes when checking out, and a PDF invoice will be provided after purchase.
Additional Information
Shipments should be inspected on arrival. Please notify us within 48 hours of any damage.
For freight deliveries, carriers may contact you to arrange a delivery time.
Weather and regional conditions can extend transit times, we recommend ordering early if you have a deadline.
Impossible de charger la disponibilité du service de retrait
Installez rapidement et proprement une ventilation murale grâce à ce kit d'installation 120 V. Il comprend tout le nécessaire pour raccorder la collerette de ventilation arrière de votre appareil à l'extérieur et pour la connecter à la prise murale 120 V de vos toilettes. Conçu pour des conduits courts et rectilignes, il garantit des performances optimales et une réduction des odeurs lorsqu'il est correctement installé.
Caractéristiques principales
Comprend un tuyau d'évacuation en PVC de 18 pouces, un clapet d'évacuation pour sécheuse, un raccord en caoutchouc et une prise murale de 120 V et 20 ampères; pour la ventilation à travers le mur uniquement.
Conçu pour la ventilation Incinolet, le tuyau a un diamètre intérieur de 4 pouces, les composants correspondent au collier de ventilation arrière pour un ajustement parfait.
Assure une bonne circulation de l'air et réduit les odeurs extérieures lorsque le conduit de ventilation est court et correctement étanche.
Compatibilité
Pour les toilettes Incinolet installées avec un conduit de ventilation traversant le mur ; sélectionnez ce kit 120 V si votre appareil est un modèle 120 V.
Ce qui est inclus
Tuyau en PVC de 1 × 18 pouces, diamètre intérieur de 4 pouces
1 × Clapet d'aération extérieur de type sèche-linge
1 × 4 po raccord en caoutchouc
1 prise murale 120 V, 20 A compatible avec la prise des toilettes
Installation et entretien, conseils rapides
Assemblez à blanc et scellez tous les joints, fixez le raccord au collier de ventilation arrière, puis au tuyau, et ajoutez le volet extérieur.
Maintenez le conduit d'évacuation aussi droit que possible ; avec un diamètre de 10 cm, limitez-vous à une longueur d'environ 3 m avec jusqu'à 2 coudes, ou augmentez le diamètre du tuyau pour les longueurs plus importantes. N'utilisez pas de tuyau de sécheuse.
Spécifications
SKU : KITC (Kit d’installation – 120 volts)
Tuyau : longueur 45,7 cm, diamètre intérieur 10,2 cm
FAQ
Est-ce uniquement pour les installations traversantes ?
Oui, ce kit est conçu pour la ventilation à travers les murs ; les installations en toiture ou sur de longues distances nécessitent des matériaux supplémentaires.
Comprend-il la prise appropriée ?
Oui, une prise murale de 120 V et 20 ampères est incluse pour correspondre à la fiche des toilettes.
Partager
