STEP ONE
Place liner in bowl before each and every use.
Using the toilet without a liner will cause urine to run out on the floor, damage the unit, and produce an odour. After use, flush the toilet, step on the foot pedal to open the bowl, and allow the waste to fall into the incineration chamber. Make sure the top edges of the liner are below the lid when it closes.
STEP TWO
Push start button after each use.
Accumulated waste can cause odours. The unit can be used at any time, even while incinerating a prior deposit.
STEP THREE
Empty ashpan daily.
Or when ash is no more than 2” deep. Ash build-up shortens heater life.
How Incinolet Works
When you push the start button, the heater and blower both come on. The heater cycles on and off for 75 minutes, while the blower stays on for an additional 20 to 40 minutes. You can use Incinolet anytime during the incineration cycle. After each use, simply push the start button again to incinerate waste.
However, if you accumulate more than three small urine deposits or one faeces deposit, it’s considered overload and will require more time to burn off. This can also cause odours and may shorten the heater’s life.
If Incinolet is primarily used in the morning and with minimal use during the day, reset the timer to 2 hours to ensure complete incineration.