Incinolet Canada
Incinolet Installation Kit, 120V; KITC
Incinolet Installation Kit, 120V; KITC
Incinolet Toilet Questions
Incinolet Toilet Questions
What power does the Incinolet need?
A dedicated 20 amp circuit. Choose 120 V at about 2000 W or 240 V at about 3500 W.
How many people can it support full time?
120 V model is about 4 people, 240 V model is about 6 people.
Does it use water or need a septic system?
No. It incinerates waste using electric heat and vents outside.
Do I need a bowl liner every time?
Yes, for every use. New units include one box of 200 liners. Bowl Liners can be purchased here.
How long is a cycle and can I use it during the cycle?
Heater runs about 60 to 75 minutes, the blower continues 20 to 40 minutes to cool. You can use it any time during a cycle, then press Start again.
How much electricity per cycle?
About 1.5 to 2.0 kWh per full cycle. Example at $0.20 per kWh is roughly $0.30 to $0.40 per cycle.
What can go in the toilet?
Human waste, toilet paper, and tampons. Do not burn trash or food. Use a liner each time.
How do I vent it?
Horizontal or vertical to outdoors, end with a dryer flap or rain cap. If total run is over 10 feet or uses more than two elbows, increase to 6 inch pipe, 15 feet max. Do not vent into an attic or crawl space.
Will there be odours?
Little to none with correct venting and by starting a cycle after each use. Overloading or poor venting can cause odor.
What happens during a power outage?
If a cycle stops mid-burn you may notice smoke or odour. Open a window. When power returns the fan restarts to cool the unit.
How often do I empty the ash and how do I dispose of it?
Empty when ash is light in color or no more than 2 inches deep. Dispose of cooled ash in household trash per local rules. Do not use it as fertilizer.
Can I run it from solar or a generator?
Technically yes, but we don't advise it. If your system supplies the continuous wattage on a dedicated 20 A circuit. Plan around 1.5 to 2.0 kWh per cycle.
Where can I install it and what clearances are needed?
Cabins, basements, bunkies, boats, RVs, and more. Allow room on the right side to operate the pedal and follow the manual’s clearance notes.
What is the warranty?
3 years on toilets having regular use and maintenance.
Do you offer pickup?
Pickup is available from our Beamsville showroom or our warehouse terminal, stock dependent.
Is Incinolet approved in my area?
Although CSA approved, requirements vary by province and municipality. Treat it as an electrical appliance install and check with your local Authority Having Jurisdiction and a licensed electrician. diction and a licensed electrician.
Shipping and delivery
Shipping and delivery
Every Incinolet toilet includes free shipping anywhere in Canada except Yukon, Northwest Territories, and Nunavut, for a flat shipping fee of $250.00.
Delivery Times
- 2–5 business days
- 2–7 business days
Parts & Accessories
Replacement parts and bowl liners ship via UPS and are subject to standard shipping fees.
Remote or Limited Addresses
If your shipping address is not accessible, please arrange delivery to the nearest post office, courier pickup point, or freight terminal.
Please note: we cannot ship to PO Boxes.
Purchase Orders
Purchase orders are accepted. Include your PO number in the order notes when checking out, and a PDF invoice will be provided after purchase.
Additional Information
Shipments should be inspected on arrival. Please notify us within 48 hours of any damage.
For freight deliveries, carriers may contact you to arrange a delivery time.
Weather and regional conditions can extend transit times, we recommend ordering early if you have a deadline.
Couldn't load pickup availability
Make through-wall venting fast and tidy with this 120V installation kit. It includes the essentials to connect your unit’s rear vent collar to the exterior and to match your toilet’s 120V plug at the wall. Designed for straight, short runs that help keep performance high and odour low when installed correctly.
Key Features
Includes 18 in PVC vent pipe, dryer vent flap, rubber coupling, and 120V 20-amp wall receptacle; for through-wall ventilation only.
Sized for Incinolet venting, pipe is 4 in interior diameter, components match the rear vent collar for a snug fit.
Supports proper airflow and lower exterior odour when the vent run is short and correctly sealed.
Compatibility
For Incinolet toilets installed with a through-wall vent path; select this 120V kit when your unit is a 120V model.
What’s Included
1 × 18 in PVC pipe, 4 in interior diameter
1 × Exterior dryer-style vent flap
1 × 4 in rubber coupling
1 × 120V, 20-amp wall receptacle to match the toilet plug
Installation & Care, Quick Tips
Dry-fit and seal all joints, clamp the coupling to the rear vent collar, then to the pipe, and add the exterior flap.
Keep the vent line as straight as possible; at 4 in diameter, stay within about 10 ft with up to 2 elbows, or increase pipe size for longer runs. Do not use dryer hose.
Specs
SKU: KITC (Installation Kit – 120 volt)
Pipe: 18 in length, 4 in ID
FAQs
Is this only for through-wall installs?
Yes, this kit is intended for through-wall ventilation; roof or long-run installs need additional materials.
Does it include the correct receptacle?
Yes, a 120V, 20-amp wall receptacle is included to match the toilet’s plug.
Share
