Skip to product information
1 of 1

Incinolet Canada

Incinolet Replacement Thermocouple; THE009

Incinolet Replacement Thermocouple; THE009

Regular price $69.95 CAD
Regular price Sale price $69.95 CAD
Sale Sold out
Shipping calculated at checkout.

Incinolet Toilet Questions

What power does the Incinolet need?

A dedicated 20 amp circuit. Choose 120 V at about 2000 W or 240 V at about 3500 W.

How many people can it support full time?

120 V model is about 4 people, 240 V model is about 6 people.

Does it use water or need a septic system?

No. It incinerates waste using electric heat and vents outside. 

Do I need a bowl liner every time?

Yes, for every use. New units include one box of 200 liners. Bowl Liners can be purchased here.

How long is a cycle and can I use it during the cycle?

Heater runs about 60 to 75 minutes, the blower continues 20 to 40 minutes to cool. You can use it any time during a cycle, then press Start again. 

How much electricity per cycle?

About 1.5 to 2.0 kWh per full cycle. Example at $0.20 per kWh is roughly $0.30 to $0.40 per cycle. 

What can go in the toilet?

Human waste, toilet paper, and tampons. Do not burn trash or food. Use a liner each time. 

How do I vent it?

Horizontal or vertical to outdoors, end with a dryer flap or rain cap. If total run is over 10 feet or uses more than two elbows, increase to 6 inch pipe, 15 feet max. Do not vent into an attic or crawl space. 

Will there be odours?

Little to none with correct venting and by starting a cycle after each use. Overloading or poor venting can cause odor. 

What happens during a power outage?

If a cycle stops mid-burn you may notice smoke or odour. Open a window. When power returns the fan restarts to cool the unit. 

How often do I empty the ash and how do I dispose of it?

Empty when ash is light in color or no more than 2 inches deep. Dispose of cooled ash in household trash per local rules. Do not use it as fertilizer. 

Can I run it from solar or a generator?

Technically yes, but we don't advise it. If your system supplies the continuous wattage on a dedicated 20 A circuit. Plan around 1.5 to 2.0 kWh per cycle. 

Where can I install it and what clearances are needed?

Cabins, basements, bunkies, boats, RVs, and more. Allow room on the right side to operate the pedal and follow the manual’s clearance notes.

What is the warranty?

3 years on toilets having regular use and maintenance.

Do you offer pickup?

Pickup is available from our Beamsville showroom or our warehouse terminal, stock dependent.

Is Incinolet approved in my area?

Although CSA approved, requirements vary by province and municipality. Treat it as an electrical appliance install and check with your local Authority Having Jurisdiction and a licensed electrician.  diction and a licensed electrician.  

Shipping and delivery

Every Incinolet toilet includes free shipping anywhere in Canada except Yukon, Northwest Territories, and Nunavut, for a flat shipping fee of $250.00.

Delivery Times

  • 2–5 business days
  • 2–7 business days

Parts & Accessories

Replacement parts and bowl liners ship via UPS and are subject to standard shipping fees.

Remote or Limited Addresses

If your shipping address is not accessible, please arrange delivery to the nearest post office, courier pickup point, or freight terminal.

Please note: we cannot ship to PO Boxes.

Purchase Orders

Purchase orders are accepted. Include your PO number in the order notes when checking out, and a PDF invoice will be provided after purchase.

Additional Information
Shipments should be inspected on arrival. Please notify us within 48 hours of any damage.

For freight deliveries, carriers may contact you to arrange a delivery time.

Weather and regional conditions can extend transit times, we recommend ordering early if you have a deadline.

Quantity

Restore accurate temperature sensing and consistent performance with this thermocouple. Working with the temperature controller, it monitors heater temperature to prevent overheating and to support clean, low-odour incineration. The thermocouple sits to the right of, and midway between, the heater terminals; the tip must touch the lower heater coil for correct readings. 

 

Key Features

Type K sensing, provides the controller with precise temperature feedback to protect the heater and improve burn consistency. 

Correct placement guidance, tip contacts the lower heater coil for reliable operation. 

OEM part listing with SKU THE009, sized for easy routing inside the chamber. 

 

Compatibility

Used across Incinolet configurations, select by part name and location rather than voltage or serial number. 

 

What’s Included

1 × Thermocouple; SKU THE009. 

 

Installation & Care (Quick Tips)

Unplug the unit, remove ashpan, access panel and top to reach the heater area. 

Route the new thermocouple as shown in the manual, position the tip so it touches the lower heater coil, then secure wiring. 

After reassembly, run a test cycle and confirm normal heater control.

 

Specs

Type: K thermocouple, chamber-mounted. 

SKU: THE009. 

Approx. weight: 0.125 lb; dimensions: 8 × 1 × 1 in. 

 

FAQs

What does the thermocouple do?

It measures heater temperature and signals the controller to regulate or stop heat, helping prevent overheating. 


Where exactly is it located?

To the right of, and midway between, the heater terminals; the tip rests against the lower heater coil. 


Is this part voltage or serial specific?

No, choose by part name and location; it is used across configurations. 

View full details